All the Vectra products to control the mix design of bituminous mixture.

Showing all 5 results

Fatigue machine – M2F


EN 12697-24 Annex A 09 2007 EN 12697 26 Annex A

logo-mlpc

The fatigue machine – M2F, is a co-developed mlpc laboratory device which meets the criteria of the NF P 12 697-22 standard. It is used for the following applications:

  • To carry out fatigue resistance tests on 2 trapezoidal specimens of bituminous materials.
  • To measure the complex modulus on 2 trapezoidal specimens of bituminous materials, using a precise enclosure (isothermal).
Request information

Gyratory Shear Press – PCG 3


NF EN 12697-31

logo-mlpc

The Shear Press – PCG 3, is a co-developed mlpc laboratory device which meets the criteria of NF EN 12697-31 as well as SHRP criteria. It is used for the following applications:

It allows the study of the compactibility and the production of specimens.

The compaction effect is obtained by the action of compression on a cylindrical specimen whose axis describes a cone with a vertex coinciding with the centre…

Request information

Laboratory mixer – BBMAX


NF-EN 12697-35 (09/2007)

logo-mlpc

The laboratory mixer – BBMAX, is a co-developed mlpc laboratory device which meets the criteria of the NF-EN 12697-35 standard of (09/2007). It is used for the following applications:

It allows the preparation of relatively large samples of any coated material in the laboratory for subsequent testing on:

  • Compacting paver screed
  • Wheel tracker
  • Gyratory shear press
  • Modulus measure
  • Fatigue tests
Request information

Plate roller – BBPAC


NF EN 12697-33 

logo-mlpc

The Plate Compactor – BBPAC, is a co-developed mlpc laboratory device which meets the criteria of the NF EN 12697-33 standard of (09/2007). It is used for the following applications:

The preparation of homogeneous slabs of bituminous mixtures usable:

  • Directly for rutting tests.
  • After sawing or core sampling for tests such as direct or indirect tensile modulus, tensile-compressive modulus, complex modulus, 2 and 4 point bending fatigue.

The plates thus produced are representative of the materials compacted in situ in terms of homogeneity and distribution of constituents and voids.

Request information

Wheel Tracker Large Device with automatic measurement

 

logo-mlpc NF EN 12 697-22 (Large Device)

 

PAVEMENT RUTTING TESTER: Orniéreur
Test methods for determining the susceptibility of bituminous materials to deform under load.
Level 2 of the French Mix Design procedure.

 

MTQ LC 26-410
Device qualified mlpc®
CSA qualification
NF P98-253-1

 

Demander des informations